Ask a Class 10 student to define a term and most can do it. Ask the same student “why” and many go quiet, or write a sentence that sounds right but misses the point. “Why is sodium kept in kerosene?” “Why do stars twinkle?” “Why does a lemon clean tarnished copper?” These questions do not test what you can recall. They test whether you can connect a cause to a result.
This guide shows how to answer why questions in science so that the answer earns full marks. You will learn a three-part method, see it applied to examples from Chemistry, Physics and Biology and pick up a short checklist for the exam. If you also want to know how longer answers are structured, read our guide on how to write a 5-mark answer in CBSE Science.
Why “Why” Questions Cost Marks
A why question has a hidden structure. The examiner has a short list of points in the marking scheme, usually the cause, the process and the result. Students lose marks in four common ways:
- They restate the question. “Sodium is kept in kerosene because it must be kept in kerosene” says nothing.
- They give the effect and skip the cause. “Because it catches fire” is only half of the answer.
- They give a cause that is too general. “Because it is reactive” is true, but it does not say with what.
- They use the wrong word. A sentence with dissolves where reacts is needed signals a weak grip on the idea.
Fixing these takes a method, not more memorising.
The Three-Part Method: Fact, Reason, Result
Every why answer can be built from three short parts.
- Fact: State the property or the observation in the question.
- Reason: Give the scientific cause. This is the point that carries the marks.
- Result: Say what follows, or link the cause back to the situation in the question.
Think of it as a chain: because of this property, this happens, so we see this. Each link should be one clear sentence. Marks are usually given for the reason and the link to the result, so do not skip either.
Worked Example 1: Chemistry
Question: Why is sodium stored in kerosene?
- Fact: Sodium is a highly reactive metal.
- Reason: It reacts vigorously with oxygen and moisture in the air, and the reaction releases heat.
- Result: The reaction can cause it to catch fire, so it is stored under kerosene, which keeps air and moisture away.
A student who writes only “because it is very reactive” gets part of the credit. The reason and the result complete the answer. For related practice, use the important questions for Class 10 Science, Chapter 3, Metals and Non-Metals.
Worked Example 2: Chemistry Again
Question: Why does curd or tamarind clean a tarnished copper vessel?
- Fact: Copper vessels develop a dull greenish or blackish layer when exposed to air and moisture.
- Reason: Curd and tamarind contain acids, and the acids react with the copper compounds forming the layer.
- Result: The layer dissolves and the shine returns.
The key word is acids. If you name the acid action, you have the reason. If you only say “they clean it”, you have repeated the question.
Worked Example 3: Physics
Question: Why do stars twinkle but planets do not?
- Fact: Starlight passes through layers of the atmosphere whose density keeps changing.
- Reason: The light bends repeatedly, so its apparent position and brightness shift slightly. Stars are so far away that they act as point sources.
- Result: We see the flickering as twinkling. Planets are closer and appear as extended sources, so the variations from different points average out.
Notice how each step answers “so what?” for the one before it. This is the pattern that earns the marks. Our Class 10 Science notes on the Human Eye and the Colourful World cover the related ideas on atmospheric refraction.
Worked Example 4: Physics With Reasoning
Question: Why is copper commonly used for electrical wires?
- Fact: Copper has very low resistivity.
- Reason: Low resistivity means it offers little opposition to the flow of current, so little energy is lost as heat.
- Result: Wires carry current efficiently, and copper is also easy to draw into thin wires, which makes it practical.
When a question has two good reasons, as here, writing both is safe, provided each is correct.
Worked Example 5: Biology
Question: Why do we feel muscle cramps after heavy exercise?
- Fact: During heavy exercise, muscle cells need more energy than the oxygen supply can support.
- Reason: The cells break down glucose without oxygen, which produces lactic acid.
- Result: The build-up of lactic acid causes cramps and a feeling of fatigue.
The reason names the process (breakdown without oxygen) and the product (lactic acid). Both points matter.
Worked Example 6: Chemistry of Carbon
Question: Why do carbon compounds generally have low melting and boiling points?
- Fact: Carbon compounds are formed by covalent bonds, so they exist as separate molecules.
- Reason: The forces of attraction between these molecules are weak.
- Result: Only a small amount of energy is needed to separate the molecules, so the melting and boiling points are low.
This answer shows the chain clearly. The property of the bond leads to the property of the force, which leads to the observed result. Practise it with the Class 10 Science notes on Carbon and Its Compounds.
Read the Question Before You Write
Before you begin, spend ten seconds on three things: the key noun in the question, the situation it describes and the number of marks. If the question says “why is a concave mirror used by dentists”, the key noun is the mirror, the situation is a dentist looking at teeth and the marks tell you how many points to give. Writing from this reading, instead of from the first fact that comes to mind, keeps the answer on target.
Match the Length to the Marks
The number of marks tells you how many points to give.
- One mark: One clear reason in a single sentence.
- Two marks: The reason, plus the result or a supporting fact.
- Three marks: Fact, reason and result, each in a sentence, or two reasons with an effect.
Do not pad a one-mark answer with a paragraph. Do not write a one-line answer to a three-mark question. If you want to see how length changes with marks, our guide on structuring a 3-mark and a 5-mark answer goes into it.
Useful Linking Words
Strong why answers use words that show cause and effect. Keep a few ready:
- because, since, as a result
- therefore, hence, so
- this causes, this leads to, this prevents
- due to, owing to
They also make the answer easy for the examiner to follow, which helps when the marker is reading quickly.
Common Mistakes to Avoid
- Repeating the question as the answer. Always add new information.
- Using vague words. Replace “it is bad”, “it is good” or “it reacts” with a specific statement.
- Skipping the scientific term. If the answer needs oxidation, refraction or osmosis, use the word.
- Giving the effect only. Add the cause behind it.
- Writing a story. Keep to the point. A why answer is short and specific.
A Quick Practice Routine
You can improve in about twenty minutes a day.
- Pick five why questions from one chapter. The end-of-chapter exercises and the Class 10 Science notes are a good source.
- Write a Fact, Reason, Result answer for each, without looking at the book.
- Compare with the textbook and mark which part you missed.
- Log the missing part. Was it the cause, the term or the link? Our guide on the wrong-answer log shows how to track this.
- Re-attempt the missed ones two days later.
Over a few weeks, the three-part pattern becomes automatic, and you will see it in questions you have never met before.
A Checklist for the Exam
Before you finish a why answer, check:
- Did I name the actual cause, not just the effect?
- Did I use the correct scientific term?
- Did I link the cause to the situation in the question?
- Does the length match the marks?
Four quick checks take less than ten seconds and prevent most of the lost marks.
Frequently Asked Questions
Q1. How do I answer a “why” question in Class 10 Science?
Use three parts: state the fact, give the scientific reason and show the result. Keep each part to a sentence, and match the number of points to the marks.
Q2. How many points should a why answer have?
Roughly one point per mark. A one-mark question needs the reason. A three-mark question needs the fact, the reason and the result, or two reasons with an effect.
Q3. Should I write the scientific term in a why answer?
Yes. If the explanation depends on a term such as oxidation, refraction or lactic acid, name it. The term is often what the marking scheme looks for.
Q4. What if I do not remember the full reason?
Write the part you know in the correct order. A partial answer with the right cause can still earn some marks, and a blank cannot.
Q5. Are “why” and “give reason” the same?
They ask for the same thing: the cause behind a statement. The three-part method works for both.
Conclusion
Why questions reward students who connect cause and result. Build every answer from a fact, a reason and a result, use the correct scientific term, keep the length in line with the marks and check your answer with the four-question list. Practise five questions a day from one chapter, log what you miss and re-attempt it. In a short time, why questions turn from the hardest questions in the paper into some of the most predictable marks.














Get Social